Mailtrap Blog

550 5.1.1 Error: Detailed Instructions for Fixing It

An SMTP session consists of back-and-forth communication between the client and the server. The client uses text commands and the server replies in numerical codes attached with messages. We discussed this communication in our blog post on SMTP Commands and Response Codes. Error codes can have different meanings on different servers, so you have several potential options for resolving the issue. Today we’ll discuss one of them, 550 5.1.1 error, and explain how to fix it.

What does 550 5.1.1 error mean?

The client typically receives a 550 5.1.1 code as a reply to RCPT TO command. It is an error code that usually stands for some issue with the recipient server. The most frequent error message is “User unknown”. In most cases, this is because the recipient address does not exist. But there are other possible reasons and other possible error messages. 

550 5.5.1 error messages you can encounter

550 5.1.1 : User unknown

550 5.1.1 : Recipient rejected

550 5.1.1 : Recipient address rejected

550 5.1.1 : Recipient address rejected: User unknown in virtual alias table

550 5.1.1 <>: Recipient address rejected: User unknown in relay recipient table

550 5.1.1 : The email account that you tried to reach does not exist

550 5.1.1 : Mailbox not found

550 5.1.1 : Invalid mailbox

550 5.1.1 : Mailbox unavailable

550 5.1.1 : Unrouteable address

550 5.1.1 : Mailbox temporarily disabled

550 5.1.1 : No such user here


550 5.1.1 : Protocol error

You may see this error message if the outgoing email was rejected. In this case, it is identifying an issue with a sending server that has used SMTP protocol instead of ESMTP. So, does this mean that 550 5.1.1 error code can be caused by issues with both the recipient and sending server? Let’s find out.

Reasons for 550 5.1.1 and solutions 

The basic reason for SMTP error RCPT TO 550 5.1.1 is a typo in the recipient’s email address, such as a missed or duplicated character, resulting in an invalid address. So, email validation should be the first thing to verify. If the email address is valid, you will need to dig deeper.

ReasonHow to solve
Issues related to the receiving server
Email address does not exist
  • Check the email address for spelling errors.
  • MX record resolving to the wrong server
  • Check the routing and DNS resolution.
  • Contact the recipient server administrator to edit DNS records and set up correct MX records.
  • Custom security settings
  • Use Telnet to connect to the receiving server.
  • If connection fails, the email may be blocked by the recipient server.
  • Explore possible issues on the sending server.
  • Issues related to the sending server
    Blacklisted IP
  • Using a dedicated tool, check to see if the IP address is blacklisted.
  • Examine email logs for spamming activity.
  • Check the server for malicious scripts.
  • Block any suspicious email account and strengthen password security.
  • Follow the blacklist-removal process.
  • Configuration issues
  • Check DNS records including rDNS, SPF, DKIM, and DMARC.
  • Set up records that will ensure that IP addresses really belong to the domains they claim.
  • What might be wrong on the receiving end

    Email address does not exist

    The recipient server can’t find the email account to which you’ve sent an email. Therefore, the email will bounce back to the sender because it cannot be delivered.

    How to solve this?

    All you can do is recheck the email address for spelling errors. 

    MX record resolving to the wrong server

    A Mail Exchange (MX) record is a DNS record used by mail servers to determine where to deliver an email. The sender mail server looks for the MX record in order to communicate with the recipient mail server. The MX record points to the A record which, in turn, points to the mail server’s IP address. For example, the MX record of the domain points to the A record of, which points to If the MX record for the recipient domain resolves to some other server, you can get 550 5.1.1 error. The email delivery fails because the receiving mail server cannot identify the email account in it. 

    How to solve this?

    First, you need to check the routing and DNS resolution using the dig tool with the +trace parameter. For example:

    dig +trace

    The domain should resolve to the correct server on your end. After that, confirm the MX records for the domain using:

    dig MX

    If you find any issues, contact the recipient server administrator to edit the DNS records and set up the correct MX records. The MX won’t resolve correctly if the DNS settings for the recipient’s domain are incorrect.

    Custom security settings

    It’s unlikely that a recipient server has no security mechanisms to protect from spam. If you get a 550 address rejected error message, your email might have been rejected by spam filters. It does not mean that you’re a spammer or your email is spammy. Usually, strict security rules are in the way.

    How to solve this?

    Use telnet to connect to the receiving SMTP server (or its IP address) to check whether the firewall is blocking the sending server. We blogged about this in How to Test SMTP Server. Run the following:

    telnet 25


    telnet 25

    If telnet says that you can’t connect, it means the recipient server has blocked your emails. So, the reason for the 550 5.1.1 error is much closer to home – on the sending server.

    What might be wrong on the sending end

    Above we learned that the email sent from your server hit spam filters on the receiving end. There are a few reasons for that. 

    Blacklisted IP

    Here is how it looks. Some companies monitor servers and blacklist them if they are identified as spam senders. The majority of mail servers refer to these blacklists and reject emails coming from them. If you get 550 5.1.1 error code, your server is likely on such a blacklist. Keep in mind that the use of a shared IP address increases the probability of being blacklisted. If you use a dedicated IP and are blacklisted anyway, your server was likely hacked.

    How to solve this?

    The first thing to be done is to check whether your IP is blacklisted. You can use such tools as IP Reputation Monitor by GlockApps, Blacklist Check by MXToolbox, or any other you like. After that, you need to follow the blacklist-removal process. Usually, it is based on the requirements of a particular blacklisting database.

    Holders of dedicated IPs should examine their email logs for spamming activity. You also need to check the server for malicious scripts. After that, block the suspicious email account and strengthen your password policy. And don’t forget to change the password, of course.

    Configuration issues

    Another spam trigger refers to improper verification of the sending server. This refers to the verification of TXT DNS records (SPF, DKIM, and DMARC) and the reverse DNS record (rDNS). If you get a 550 5.1.1 rejection, the DNS settings might be misconfigured.

    How to solve this?

    dig -x

    The full rDNS record will be shown in the “ANSWER SECTION” of the outcome. The record must be set up and valid. You can also make use of online tools to verify rDNS:

    Reverse DNS Lookup by

    Reverse DNS Lookup by

    Reverse Lookup by MXToolbox

    dig NS

    and then 

    dig TXT is your name server, which you can find in the “ANSWER SECTION” of the outcome to dig NS

    nslookup -type=txt

    You’ll then need to find the SPF record that starts with v=spf1. For example:

    v=spf1 ~all

    All DNS records should be set up in a way to show that an IP address indeed belongs to the domain it claims. Otherwise, the recipient server may think that it is using someone else’s domain to send spam emails. You can read more about this in Why Emails Going to Spam and How to Prevent It

    How to fix 550 5.1.1 user unknown in Exchange, Exim, Postfix and Qmail servers

    For Microsoft Exchange Servers

    Security parameters are the main reason for error ‘550 5.1.1 User unknown’ in Exchange Servers 2010 and later. They authenticate the sender to prevent spamming and restrict email sending by default. All emails sent beyond local email addresses get bounced back with the 550 5.1.1 error. Remove the restriction as follows:

    For Exim servers

    For Exim mail servers, 550 5.1.1 User unknown is not a common issue. But if it happens, the route likely needs to be identified. First, make sure that the mail server settings are correct. Then, verify filters and custom rules added to the server. This will help you identify and fix the 550 address rejected.

    For Postfix and Qmail servers

    Start with the verification of the recipient domain resolution. It must resolve to the correct server. If the email service for the domain is hosted elsewhere, turn it off. Verify filters and custom rules added to the server. They must not mess up the mail delivery.

    Can I avoid 550 5.1.1 when sending bulk emails?

    550 5.1.1 is a nightmare for any marketer who deals with bulk emails. Why? Just imagine that your email campaign has thousands of recipients. If you failed to verify all of them, it’s most likely that a large number of email addresses are invalid. This entails multiple bounces with 550 5.1.1 User unknown. Will this have some sort of effect on email hosting providers? What do you think? Of course, it will, and your client will most likely be identified as a spammer sending emails to unverified addresses. 

    You might have guessed that there is only one way to avoid this failure – keep your mailing lists clean. For this, you need to make sure that email address validation is a high-priority task. You can easily automate the process using bulk email verifiers available on the market. Some of them we’ve already introduced in the Email Testing Checklist

    To wrap up

    As you can see, 550 5.1.1 User unknown is not an unsolvable issue. Be attentive to your server settings and do not neglect email address verification. By following these steps, you won’t jeopardize your email campaign. additionally, it’s advisable to test your emails for spam, and can help you with this. Mailtrap is a service for sending test emails via SMTP and also has features for email content verification and debugging. You can’t have too much of a good thing. For more on what else this service offers, read the Mailtrap Getting Started Guide.

    Exit mobile version